19
LOAD THE DRYER
Load the dryer with the wet laundry from the washer. If the load is extra
large, you may need to divide it into smaller loads for proper performance
and fabric care.
CLEAN THE LINT FILTER
If the lint lter has not already been cleaned, lift out the lter and remove
the lint from the last load. This will help ensure the fastest and most ecient
drying performance.
TURN ON THE DRYER
Press the POWER button to turn ON the dryer. The cycle LEDs will illuminate
and a chime will sound (refer to page 18).
SELECT A CYCLE
Turn the cycle selector knob in either direction until the LED for the desired
cycle is illuminated. The preset temperature, dry level, and option settings for
that cycle will display (refer to pages 20 and 21).
SELECT CYCLE MODIFIERS
Default settings for the selected cycle can now be changed, if desired, using
the Temp and Dry Level buttons (refer to page 24).
NOTE: Not all options or modiers are available on all cycles. Temperature
can only be adjusted on Timed Dry cycles; Dry Level is only available on
Auto Dry cycles. A dierent chime will sound and the LED will not illuminate
if the selection is not allowed.
SELECT CYCLE OPTIONS
Cycle options can be added using the option buttons as shown on page 25-
26 (wrinkle guard, static shield, control lock and easy iron).
NOTE: Not all options or modiers are available on all cycles. A dierent
chime will sound and the LED will not come on if the selection is not allowed.
BEGIN CYCLE
Press the START/PAUSE button to begin the cycle. The cycle can be paused
at any time by opening the door or by pressing the START/PAUSE button. If
the cycle is not restarted within four minutes of being paused, the dryer will shut
o and the settings will be lost.
END OF CYCLE
When the cycle is nished, the chime will sound. Immediately remove your
clothing from the dryer to reduce wrinkling. If WRINKLE GUARD is selected,
the dryer will tumble briey every few minutes to help prevent wrinkles from
setting in the clothes.
1
2
3
4
5
6
7
8
HOW TO USE