aus

The appliance can easily be installed in a fitted kitchen between wooden and plastic walls. If the plug is not freely accessible following installation,

an allpole disconnector with a contact opening of at least 3 mm must be fitted on the installation side to satisfy the relevant safety regulations.

Waste-water connection

The required work sequence can be found in the installation instructions.

If required, fit a siphon with an drainage connection.

Connect the waste-water hose to the drainage connection of the siphon with the enclosed parts.

Ensure that the drainage hose is not kinked, crushed or twisted and that there is no cover plate in the drainage to prevent the waste water from flowing out!

Fresh-water connection

Connect the fresh-water connection to the tap according to the installation instructions with the enclosed parts. Ensure that the fresh-water connection is not kinked, crushed or twisted. When replacing the appliance, always use a new water supply hose.

Water pressure:

at least 0.05 MPa (0.5 bar), maximum 1 MPa (10 bar). At a higher water pressure: connect pressure-reducing valve ahead.

Inlet rate:

minimum 10 litres/minute

Water temperature:

We recommend cold water connection only.

Electrical connection

Connect the appliance to an alternating current only, ranging from 220 V to

240 V and 50 Hz or 60 Hz via a correctly installed socket with protective earth conductor. See rating plate for required fusing 31 .

The socket must be near the appliance and freely accessible following installation.

The connection may be modified by technicians only.

A power cord extension may be purchased from customer service only. Use only a residual-current-operated

circuit-breaker which features the symbol. Only this extension guarantees compliance with the currently valid regulations.

The appliance features a water damage protection system. Please note the system will function only when the power supply is connected.

Removing the appliance

Also observe the sequence of worksteps here.

Disconnect the appliance from the power supply.

Turn off the water supply.

Disconnect the waste water and fresh water connections.

Loosen the fastening screws under the worktop.

If fitted, remove the base panel.

Pull out the appliance, carefully pulling the hose behind.

22

Page 22
Image 22
Kenmore 9000416647(8811) Waste-water connection, Fresh-water connection, Electrical connection, Removing the appliance

9000416647(8811) specifications

The Kenmore 9000416647, also known as model 8811, stands out as a versatile and dependable appliance in its category, celebrated for its advanced features and innovative technologies. Kenmore has crafted this model to meet the evolving needs of modern households, making it a popular choice for consumers seeking convenience and efficiency.

One of the standout features of the Kenmore 9000416647 is its robust cooking capabilities. It comes equipped with a powerful heating element that ensures even cooking and consistent results for a wide variety of dishes. The appliance's spacious interior allows users to prepare larger meals, accommodating everything from family dinners to holiday feasts.

A key aspect of the Kenmore 9000416647 is its intuitive control panel, which incorporates user-friendly buttons and a clear digital display. This design simplifies the cooking process, allowing users to easily select cooking modes, adjust temperatures, and set timers. Whether one opts for baking, broiling, or roasting, the controls are straightforward, enhancing the overall cooking experience.

The model features advanced cooking technologies, including convection heating, which circulates hot air around the food for faster and more even cooking. This technology not only improves cooking performance but also helps to seal in moisture and flavor, producing dishes that are juicy and flavorful. Additionally, the appliance's self-cleaning function is a significant benefit, saving time and effort while ensuring a clean cooking environment.

Durability is another hallmark of the Kenmore 9000416647. Constructed with high-quality materials, the appliance is designed to withstand the rigors of everyday cooking without compromising performance. Its sleek and modern design also adds aesthetic appeal to any kitchen, blending seamlessly with existing decor.

In terms of energy efficiency, the Kenmore 9000416647 is designed to consume less power while still delivering excellent cooking results. This feature not only reduces electricity costs but also minimizes the environmental impact, making it an attractive option for eco-conscious consumers.

Overall, the Kenmore 9000416647 (8811) is an exemplary model that combines functionality with advanced technology. Its user-friendly features, durability, and energy efficiency make it a valuable addition to any kitchen. As families continue to seek appliances that enhance their cooking experience, the 9000416647 stands ready to meet and exceed expectations.