
3. Side Burner & Side Shelf Assembly
(a)Loosen (2) preinstalled 1/4 x 10mm Phillips head screws and (2) ¼ lock washers from right side of grill head (A) as shown. Do not screw out fully; leave ¼ extended for shelf assembly. (Fig. 9)
(b)Through side burner shelf keyholes, hang side burner shelf (N) on two loosened screws. (Fig. 10)
(c)Using (2) 1/4 x 10mm Phillips head screws (BB) and
(2) 1/4 flat washers (EE), attach side burner shelf (N) to grill head from inside the firebox. Insert (1) 5/32 x 8 mm Phillips head screws (CC) and (1) 5/32 lock washers (GG) to attach the side burner shelf front panel to the control panel (Fig 11).Fully tighten the two loosened screws to secure shelf to firebox.
(d)Repeat steps (a) through (c) to install side shelf.
Fig.9 | A |
| |
Fig.10 |
|
N |
Fig.11 |
N |
12