Oven Control Functions

READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar with the various functions of the oven as described below.

......

BAKE PAD--Used

to select the bake® function.

SELECT BROIL PAD-- Used to select the variable broil feature.

 

UP and DOWN

ARROW

 

PADS-- Used along with

the

function pads

to select

...........A

oven temperature,

time of

 

day, clean time and minute

timer,

\

TIMER

ON/OFF

PAD--

Used to set or

CLOCK BET PAD--

cancel the minute timer. The minute

Used to set the time

timer

does not

start or

stop cooking,

of day.

STOP/CLEAR -- Used to clear

any function previously entered except the time of day and minute timer. Press STOP/CLEAR to stop cooking,

Setting Oven Controls

Note: The time of day must first be set in order to operate the oven.

.......

To Set the Clock

iiii:if:ii

When the range is first plugged in, or when the power supply to the range has been interrupted, the display will flash "12:00".

1.Press _.

2.Within 5 seconds, press and hold the /_. or v until the correct time of day appears in the display.

To Set the MinuteTimer:

1.Press _ .

2.Press the /--,to increase the time in one minute increments. Press and hold the /_ to increase the time in 10 minute increments. The timer can be set for any amount of time from 1 minute to 11 hours and 59 minutes. Note: If you press the v first, the timer will advance to 11 hours and 59 minutes.

3.The display shows the timer count down in minutes until one minute remains. Then the display will count down in seconds.

4. When the set time has run out, the timer will sound a 3 second beep. 0:00 will appear in the display until _

is

pressed.

Note: While the minute timer is counting down, the ":" will flash. The minute timer does not start or stop cooking. It serves as an extra timer in the kitchen that will beep when the set time has run out. The minute timer can be used alone or during any of the other oven functions. When the minute timer is in use with any other function, the minute timer will be shown in the display. To view other functions, press the pad for that function.

To Change the Minute Timer while it is in use:

While the timer is active and shows in the display, press and hold the ._, or v to increase or decrease the time.

To Cancel the Minute Timer before the set time has run out: Press @.

Page 9
Image 9
Kenmore 790.9503, 9504 manual To Set the Clock, To Set the MinuteTimer