Setting Oven Controls
Changing oven temperature display
The oven control is preset to display °F (Fahrenheit) when shipped from the factory. The control can be changed to display either Fahrenheit or Celsius.
Example; to change the temperature to display °C (Celsius) or °F (Fahrenheit):
1.Press and hold Broil key pad for 6 seconds.
2.Press Flex Clean key pad to toggle between Fahrenheit or Celsius temperature display modes (Figs. ] & 2).
3.Press STARTtO accept choice.
Important note:
The oven temperature display cannot be modified if Bake or Flex Clean is active.
Setting Oven Lockout
LOCKOUTOVEN
The control may be programmed to lock the oven door and lock the oven control key pads.
To activate the oven lockout feature:
]. Be sure oven door is completely closed.
[]
. Press and hold STOPfor 3 seconds. DOOR LOCKED (See
Fig. 5) will appear in the display. The motor driven door latch mechanism will begin locking the oven door
automatically. Do not open the oven door. Allow about ]5 seconds for the oven door to completely lock. Once the oven door is locked, the Loc will appear in the display (See Fig. 6).
Fig. ] | Fig. 2 |
Setting silent or audible control mode
Silent mode allows the oven control to operate without audible tones. The control may be programmed for silent operation and later returned to operating with aM1the normaM audible tones.
Example; to set for silent or audible mode:
]. Press and hold Delay Start key pad for 6 seconds.
2.Press Flex Clean key pad to toggle between beep ON (Fig. 3) or beep OFF (Fig. 4).
3.Press STARTtO accept choice.
Fig. 3 | Fig. 4 |
Fig. 5 | Fig. 6 |
To cancel the oven lockout feature:
1. Press and hold STOPfor 3 seconds. The motor driven
door latch mechanism will begin unlocking the oven
door automatically. Do not open the oven door. Allow about 15 seconds for the oven door to completely unlock.
2.When the Loc and DOOR LOCKED messages no longer display, the oven door may be opened and the oven control key pads will be available for use.
Important notes:
"To avoid possible damage to the oven door latching mechanism, do not attempt to open or close the oven door whenever the DOOR LOCKED message is flashing.
If a control key pad is pressed when OVEN LOCI(OUT is active, the control may triple beep indicating the key pad action is not available when the OVEN LOCI(OUT feature is active.
]3
