DRYER USE

STATUS

 

 

AUTO

 

 

 

 

MODIFIERS & OPTIONS

 

 

 

Power

CYCLES

Delicate

 

 

 

 

 

 

Wet_

0

 

 

TIMED

I

igh

 

 

 

 

Damp _

 

 

Casual

CYCLES

 

 

 

 

 

 

 

 

 

 

 

Cool Down _

 

 

 

Timed

 

Medium

High

 

 

 

 

 

 

 

 

 

 

 

Clothes Dry Ja_t

_

More

 

Dry

 

 

 

 

 

Wrinkle

Guard O

_

Normal

Jeans

Express

 

Medium

 

 

 

 

 

 

 

 

 

 

0

Less

 

Dry

 

 

 

 

 

 

 

 

 

 

Low

 

 

 

 

 

 

 

 

 

 

 

 

 

Controls

Locked

_

 

 

Touch Up

 

Extra Low

O

Wrinkle Guard 90

 

 

 

 

 

Check Lint Screen

V

 

 

 

Air 0nly

 

 

 

 

 

Dryness

 

 

 

 

 

 

 

 

 

 

O

 

 

 

 

 

 

Level

 

 

 

 

 

 

 

AU-OCYC!So,,JY

 

 

 

 

 

 

 

 

 

 

 

 

D

Cycle Signal

 

 

 

 

 

 

Temperature

 

LOCi/NLOCKCONTROLS

 

 

 

 

 

 

_pJusSll_/cyc _

 

 

 

 

 

 

 

 

 

 

o_1¥

 

 

 

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from dryer.

Do not dry anything that has ever had anything flammable on it (even after washing).

Failure to follow these instructions can result in death, explosion, or fire.

Follow these basic steps to start your dryer. Please refer to specific sections of this manual for more detailed information.

1.Clean lint screen before each load. See "Cleaning the Lint Screen."

2.Place laundry into dryer and shut door.

3.Press POWER.

4.Select an Auto or Timed Cycle. The preset settings for Auto or Timed Cycles will illuminate. The estimated (auto cycle) or actual (timed) cycle time (in minutes) will show in the display.

NOTE: A default time is displayed when an automatic cycle is selected. During the first few minutes of the drying process, the cycle time may automatically vary from the default time based on the size and fabric type of the load. Toward the end of the drying process, the estimated time display will adjust again, showing the final drying time.

To use an Auto Cycle

Select an Auto Cycle. Auto cycles are preset to Normal.

Select DRYNESS LEVEL to adjust how dry you want the load. As the cycle runs, the control senses the dryness of the load and adjusts the time automatically for the selected dryness level.

Fire Hazard

No washer can completely remove oil.

Do not dry anything that has ever had any type of oil on it (including cooking oils).

Items containing foam, rubber, or plastic must be dried on a clothesline or by using an Air Cycle.

Failure to follow these instructions can result in death or fire.

To make changes to the Dryness Level and/or Options during an Auto Cycle:

Press STOP once.

Adjust Dryness Level and/or Options.

NOTE: Dryness Level selections can be made only while using Auto Cycles. Selecting More, Normal or Less automatically adjusts the sensed time needed.

More

Normal

Less

0

Dryness

Level

AUTOCYCLES0NIY

Auto Dry cycles take the guesswork out of drying time and enhances fabric care. The amount of time that is

displayed is the estimated time remaining in the cycle.

16

Page 16
Image 16
Kenmore 9758, 9757, 110.9756 manual Dryer USE, To use an Auto Cycle, Fire Hazard