HIGH=TEMPALARM SWITCH (SOME MODELS)
An audible alarm will sound if the freezer temperature reaches unsafe levels. The alarm operates on household electricity. If the power fails, the alarm will not perform.
An ON/OFF switch allows the high temperature alarm to be deactivated if desired. NOTE: You must open the freezer door to view the alarm switch. The freezer is shipped with the switch in the OFF position. After the freezer has run long enough to lower the temperature, you may set the switch to the ON position.
,,To activate the alarm, set the switch to the ON position.
,,To deactivate the alarm, set the switch to the OFF position.
Blue
DROP FRONT SHELF (UPRIGHT MODELS)
The Drop Front Shelf, located at the bottom of the freezer, provides a separate compartment for small irregular shaped items or large, bulky items. Lift the shelf front up and out to remove.
ADJUSTABLE INTERIOR SHELVES
(SOME UPRIGHT MODELS)
spacers that stabilize the shelves for shipping may be removed and discarded.
BLUE DEFROST BUTTON (SOME CHEST MODELS)
iMPORTANT: it is time to defrost and clean the freezer when the blue defrost button is completely covered with frost.
SLIDE=OUT BASKET OR TRIVET (SOMEUPRIGHT
MODELS)
A
INTERIOR LIGHT
I Adjustable Interior Shelves - Upright Models | Adjustable Interior Shelves - Updght Models |
SLIDE-ASIDE BASKET (SOME CHEST MODELS)
This basket helps organize
packages in the freezer, slide the basket aside, or lift out.
The light comes on automatically when the door is opened. To replace the light bulb, turn the temperature control to OFF and unplug the electrical cord. Replace the old bulb with a bulb of the same wattage.
TILT=OUT SHELF
This shelf is located inside on the freezer door and provides additional storage space. To access an item, tilt top of "basket" shelf down.
BASKET DIVIDER (SOME UPRIGHT MODELS)
Use these handy dividers to keep the various items stored
in your baskets more
organized. To change the location of the divider simply slide your basket out, lift up on
each end of the divider until itiii_i is disengaged from the basket,
place divider in the desired location (make sure it is between two vertical wires) and press down firmly on each end until it snaps into place.