Kenmore P4VT8 user manual USB 2.0 Header

Serial ATA (SATA) Power Cable (4-conductor) (Optional)

connect to the SATA	connect to the
HDD power connector	powersupply

Please connect the black end of SATA power cable to the power connector on each drive. Then connect the white end of SATA power cable to the power connector of the power supply.

USB 2.0 Header

(9-pin USB67) (see p.7 item 19)

USB_PWR

P-7

P+7 GND

DUMMY

1

GND

P+6

P-6

USB_PWR

ASRock I/O PlusTM provides you 6 default USB 2.0 ports on the rear panel. If the rear USB ports are not sufficient, this USB 2.0 header (USB67) is available to support 2 additional USB 2.0 ports.

Shared USB 2.0 Header

(9-pin USB4_5) (see p.7 item 31)

USB_PWR

P-5

P+5 GND

DUMMY

1

GND

P+4

P-4

USB_PWR

This USB4_5 header is shared with the USB 2.0 ports 4,5 on the rear panel. When using the front panel USB ports by attaching the front panel USB cable to this header (USB4_5), the rear panel USB ports 4,5 will not be able to function.

Infrared Module Connector
(5-pin IR1)
(see p.7 item 18)	1

IRTX +5V

DUMMY

GND

IRRX

This connector supports an optional wireless transmitting and receiving infrared module.

Internal Audio Connectors

(4-pin CD1, 4-pin AUX1) (CD1: see p.7 item 30) (AUX1: see p.7 item 29)

CD-L

GND CD1 GND

CD-R

AUX-L

GND AUX1

GND

AUX-R

These connectors allow you to receive stereo audio input from sound sources such as

aCD-ROM, DVD-ROM, TV tuner card, or MPEG card.

Front Panel Audio Connector

(9-pin AUDIO1) (see p.7 item 28)

GND +5VA

BACKOUT-R

BACKOUT-L

1

AUD-OUT-L GND

AUD-OUT-R MIC-POWER

MIC

This is an interface for front panel audio cable that allows convenient connection and control of audio devices.

1 5