Setting menu items

• You cannot change <Audio> settings (except <Preout Setup>) when the unit is in standby.

Menu item

Selectable setting/item

Initial: Underlined

 

Fader/Balance

Fader : Adjust the front and rear speaker output balance.

 

 

♦ F6 to R6; Initial 0

 

 

 

• When using a two-speaker system, set the fader to the

 

 

center (0).

 

 

 

 

 

 

 

Balance : Adjust the left and right speaker output balance.

 

 

♦ L6 to R6; Initial 0

 

 

 

Press [5/∞/2/3] or drag [

 

 

 

] to adjust.

 

 

• To clear the adjustment, press [Center].

 

 

 

 

 

 

 

Equalizer

Change the sound mode or adjust and store the equalization

 

 

for each source. (☞ page 28)

 

 

 

♦ Natural/Rock/Pops/Easy/Top40/Jazz/User

 

 

 

 

 

 

 

Loudness

You can activate/deactivate the loudness function.

 

 

♦ OFF

: Cancels.

 

 

 

♦ ON

: Boost low and high frequencies to

 

 

 

produce a well-balanced sound at a low

Audio

 

 

volume level. The LOUD indicator lights up.

 

 

 

 

 

 

 

X’over

Adjust the cross over frequency. (☞ page 29)

 

 

 

 

 

 

 

 

Volume Offset

Adjust and store the auto-adjustment volume level for each

 

 

source. (For discs, the adjustment is stored for each of the

 

 

following categories: DVD/DVD-VR, VCD/CD, and DivX/

 

 

MPEG1/MPEG2/MP3/WMA/WAV/AAC.) The volume level will

 

 

automatically increase or decrease when you change the

 

 

source.

 

 

 

 

 

♦–15to +6; Initial 0

Preout Setup*1♦ Rear

: Select this when rear speaker is connected

 

 

 

to REAR/SW jacks through an amplifier.

 

♦ Subwoofer :

Select this when subwoofer is connected

 

 

 

to REAR/SW jacks.

 

 

 

 

Subwoofer*2

♦ ON

:

Activates the subwoofer.

 

♦ OFF

:

Cancels.

 

 

Speaker Select

Select the size of the connected speaker.

♦Standard/Narrow/Middle/Wide

*1 You can change the setting only when the unit is in standby.

*2 Selectable only when <Subwoofer> is selected for <Preout Setup>.

English 35