USING THE REMOTE CONTROLLER

Overview

For DDX4048BT/DDX3048:

This unit can be operated using the Remote Controller (RC-DV340) supplied with this unit. For DDX418/DDX318:

Optional Remote Controller KNA-RCDV331 is designed for controlling this unit. Refer to the instruction manual that comes with the remote controller.

CAUTION

•Put the Remote Controller in a place where it will not move during braking or other operations. A dangerous situation could result, if the Remote Controller falls down and gets wedged under the pedals while driving.

•Do not leave the battery near fire or under direct sunlight. A fire, explosion or excessive heat generation may result.

•Do not recharge, short, break up or heat the battery or place it in an open fire. Such actions may cause the battery to leak fluid. If spilled fluid comes in contact with your eyes or on clothing, immediately rinse with water and consult a physician.

•Place the battery out of reach of children. In the unlikely event that a child swallows the battery, immediately consult a physician.

Battery installation

Use two “AAA”/”R03”-size batteries.

Insert the batteries with the + and – poles aligned properly, following the illustration inside the case.

•If the Remote Controller operates only over shorter distances or does not operate at all, it is possible that the batteries are depleted. In such instances, replace the both batteries with new ones.

Remote Controller mode switch

The functions operated from the remote controller differ depending on the position of the mode switch.

AUDt

DVDt

T Vt

AUD mode: Switch to this mode when controlling a selected source or tuner source, etc.

DVD mode: Switch to this mode when playing DVDs or CDs etc. with the player integrated in this unit.

TV mode: Not used.

•The position of the remote control mode switch is indicated in the title of each mode, e.g., “(AUD mode)”.

•When controlling a player that is not integrated in the unit, select “AUD” mode.

48DDX418/DDX4048BT/DDX318/DDX3048