Before Use
Tone curve setupYou can set a Tone curve.
1Display the Tone setup screenT o n e
Tone setup screen
| 1 |
| 2 |
| 3 |
5 | 4 |
|
6
1 Bass adjustment items are displayed.
2 Middle adjustment items are displayed.
3Treble adjustment items are displayed.
4 Bass DC Extend settings
If turned "On", it extends the bass center frequency to the low register by approximately 20%.
5Tone curve becomes flat.
6 Returns to the Equalizer screen.
• Tone curve can be set for each source.
2Select a frequency band you wish to adjustYou can adjust the following frequency bands. Bass: 40, 50, 60, 70, 80, 100, 120, 150 Hz Middle: 500, 1k, 1.5k, 2k Hz
Treble: 10k, 12.5k, 15k, 17.5k Hz
3Set a center frequencyFREQ
Sound Effects Menu4Set a level
Level
5Set a Q factorQ Factor
You can set it up only when Bass or Middle is adjusted.
6Close the Tone setup screenEnglish 79