Setup Menu
AV Interface Setup
You can set audio and visual (AV) interface parameters.
1Display the AV Interface screen
Touch [AV Interface] in the SETUP Menu (page 60).
2Setup each item
1
2
3
4
1Sets a name to be displayed when you
select a system that is connected via the AV INPUT port. (
VIDEO)
⁄
•If you have set the navigation system connection to "AV IN", the display is fixed to "NAV".
2 Sets an image display of the system that is connected via the AV INPUT port. (
Off ) "Off": When the image source is switched, an image entered via the AV INPUT
port is displayed.
"On": When an image signal is entered via the AV INPUT port, this image is displayed.
3 Selects a navigation system connection. (
RGB)
"RGB": Allows the Kenwood’s Navigation System to connect via its interface cable.
"Off": Must be used if no navigation system is connected. (The navigation display is cancelled when the AV source is switched.)
4 Return to the original screen.
5
6
7
5Selects an AV source to be output at the AV OUTPUT port. (
6Sets a method to switch to the rear view camera video display. (
Off )
"On": Switches to the rear view camera video display when engaging the shift knob of car to "Reverse".
"Off": Switches to the the rear view camera video display when engaging the shift knob of car to "Reverse" and then pressing the [V.SEL] switch several times.
7You can flip the left and right of the rear view camera video display. Set to "Reverse" and the the rear view will be displayed left
and right in mirror image on the screen. (
Off )
8
9
10
11
8Selects speakers used for voice guidance of the navigation system. (
Uses the front left side speaker | |
| for voice guidance. |
Uses the front right side speaker | |
| for voice guidance. |
"Front All": Uses both front speakers for voice guidance.
9Adjusts the volume for voice guidance of the navigation system. (
21)
pMutes the volume during voice guidance of the navigation system. (
On)
When turned "On", the volume level drops
66DDX7039