for voice guidance.
qSets a selecting method of audio source from the Navigation system.( Off ) "On": Allows you to select the audio
source input from the Navigation system interface by pressing [SRC] or selecting it on Source Select screen.
"Off": The audio source cannot be selected using [SRC] or on Source Select screen.
User Interface
You can set up user interface parameters.
1Display the User Interface screen
Touch [User Interface] in the SETUP Menu (page 60).
2Setup each item
1
2
3
4
1Selects the background to display. "Change": Displays images entered into
this unit. Refer to <Background Select> (page 69).
2Enables entering or deleting of wallpaler "images "into of from this unit.
Press to enter the USB suspend mode, and then remove the USB device. "Memory": Enables entering of
background images. See <Entering Background>
(page 68).
"Delete": Enables deleting of background image entered into this unit. See <Background Delete> (page 69).
3Sets whether to display the target when touching the panel.
4Returns to the original screen.
5
6
7
8
5Sets an
"Auto": Information is displayed for 5 seconds when updated.
"Manual": Information is displayed when you touch on the screen.
6Sets an
"Auto": Information is displayed for 5 seconds when updated.
"Off": Information is not displayed.
7Sets an
"Auto": Information is displayed for 5 seconds when updated.
"Manual": Information is displayed when you touch on the screen.
8Returns to the original screen.
9
10
11
9Sets an
"Auto": Information is displayed for 5 seconds when updated.
"Manual": Information is displayed when you touch on the screen.
Next page 3
English 67