Audio Control
Tone Setup
You can set a Tone curve.
1Display the Tone screen
See <Equalizer Control> (page 79).
2Set the Tone
5
16
27
38
4 |
| 9 |
1Bass adjustment items are displayed.
2Middle adjustment items are displayed.
3Treble adjustment items are displayed.
4Bass DC Extend settings (Only when Bass is selected)
If turned "On", it extends the bass center frequency to the low register by approximately 20%.
5Tone curve becomes flat.
6Sets the Center frequency.
7Sets the level.
8Sets the Q factor. (Only Bass and Middle can be set)
9Returns to the original screen.
Zone Control
You can set the front and rear audio source.
1Display Zone Control
Touch [Zone Control] in the Audio Control Menu (page 78).
2 Set the Zone Control
12
3
3
4
5
1Turns the Zone Function (that sets different source sounds for front and rear speakers) On or Off.
2Switches the front and rear audio sources. (This button appears when the Zone function is On.)
Use "Reverse" to change over the front and rear audio sources.
3Sets the front and rear audio source separately.
(This button appears when the Zone function is On.)
80DDX7039