Kenwood DNX8120 Basic Operations, E D, C B A

Basic Operations

E D

C

Turns power ON/OFF

Press the button to turn on the power.

When the button is pressed and held down for 1 second or more, the power is turned off.

C B A

B

Switches to the Navigation system

Press the button to switch the display to the navigation system screen.

D

Adjusts the volume

Playing a USB device

E

Attenuates the volume

Press it to attenuate the volume. Press it again to cancel muting.

When connecting a USB device, playback starts automatically.

You must update the database if you are using a USB device that is different from the one you used before or if you have replaced the audio files in the USB device. For information on how to update the database, refer to <Function while displaying the Control Screen> in USB Device Control (page 37).

⁄

• If the USB source is selected when a USB device is not connected, "No Device" is displayed.

•When the playback is stopped and then restarted, the playback will start from the point where it was stopped at the last time. Even if the USB is removed and connected again, the playback will start from the last stopped point unless the contents in the USB device is changed.

•Make sure that the USB device is connected firmly.

Removing the USB device

Press on the USB control screen to enter the USB suspend mode, and then remove the USB device. Refer to <USB Device Control> (page 37).

¤

• Removing the USB device before entering the USB suspend mode may result in damaging the data in the USB device.

10DNX8120/DDX812/DDX8032BT