Setup Menu
Crossover Network Setup |
| on the Speaker Set Up screen. |
|
|
|
You can set a crossover frequency of speakers.
1Select the speaker to set the crossover
|
| 1 |
|
|
|
|
|
|
|
2 |
|
|
| 2 |
|
|
|
|
|
3 |
|
|
| 3 |
|
| 5 |
|
|
4 |
|
|
|
|
|
|
|
| |
|
| 6 | ||
|
|
|
| |
|
|
|
|
|
1Sets the High Pass Filter of the center speaker.
2Sets the High Pass Filter of the front speaker.
3 Sets the High Pass Filter of the rear speaker. 4 Sets the Low Pass Filter of the sub woofer. 5 Switches to the crossover setup screen.
6 Returns to the "SETUP Menu" screen.
2Display the Crossover setup screen
3 Set the crossover
7
8
9 |
| 10 |
7Sets the crossover frequency.
When center speaker, front speaker or rear speaker is selected in step 1:
High Pass Filter adjustment When Subwoofer is selected in step 1 :
Low Pass Filter adjustment
8Sets a crossover slope.
9Sets the phase of subwoofer output (it is displayed when the subwoofer crossover frequency is set).
The phase is reversed 180 degrees when set to "Reverse".
pReturns to the "Audio SETUP" screen.
⁄
•When you select a speaker type on the Speaker Set Up screen, the crossover frequency setup is cleared.
•During crossover setup, the speaker type is set to "User"
68DNX8120/DDX812/DDX8032BT