EXT SW Setup

Setting up power specification of the external device for which the power is controlled from this unit.

1Display the EXT SW SETUP screen

Touch in the "SETUP Menu" screen (page 64).

2Perform EXT SW Setup

Setting EXT SW Control 1 (EXT SW1)

1

2

3

4

Setting EXT SW Control 2 (EXT SW2)

The setup method is the same as "EXT SW1".

1Sets the name of the external device. See <Character Entry> (page 50) for information on how to enter the name.

2Sets the power signal output mode. ( EXT SW1: Pulse, EXT SW2: Level) Pulse: Generates a single power signal

pulse.

Level: Continues output of high power signal.

Sets to turn output on/off each time the button on the EXT SW Control screen is pressed.

3Sets the Pulse signal output time. Outputs 500ms when "1" is set. Increases by 200ms with each step. Up to 100 steps

can be set.

4Returns to the original screen.

English 91