Kenwood DPF-1030, DPF-2030 To check or change the programmed tracks, To add a track to the program, To clear tracks from the program, Main unit, Main unit, 3 Set the entry

Programmed play (PGM mode)

Auto space function

During programming of tracks, a non-recorded space of a few secondswillbeautomaticallycreatedbetweentracks. Byrecording 15 tracks with these spaces on tape, the search and repeat play operations of tape using the DPSS function (which works by searching the non-recorded spaces) can be performed reliably.

÷Even when the performances of two tracks are continuous (which occurs with classical or live recording music), the spaces will be created if they have different track numbers.

To check or change the programmed tracks

Lights up.

Do this operation in stop mode.1Press the CHECK key.

CHECK	Press until the track No. to
	be changed is displayed.

2Select the new track No.

Main unit		Remote control unit
(Except for DPF-2030)		(Except for DPF-1030)
		1	2	3
4	¢	4	5	6

	TRACK		3
PGM	NO.	P.C.	6
	0 6
		P_ 02

÷Perform only step 1 to simply check the program.

÷Each time the key is pressed, the program No. (P-No.) and the track No. on CD are displayed.

÷The previous display resumes in a few seconds.

7	8	9
	0	+10

3 Set the entry.	÷Press it while the “P.C.” indicator is lit.
	P.MODE

To add a track to the program

Dothisoperationinstopmode.

1Select the desired track No.

Main unit		Remote control unit
(Except for DPF-2030)		(Except for DPF-1030)
		1	2	3
4	¢	4	5	6
		7	8	9
			0	+10

2Press the P.MODE key.

÷When a track No. is selected, the track will be added to the end of the existing program.

To clear tracks from the program

Press to clear tracks from the end.

CLEAR

÷Each time the key is pressed, the last track in the program is cleared. ÷The tracks which are programmed earlier than the track being played

cannot be cleared.

To clear all track.

P.MODE

÷Selected tracks can be also completely cleared just by operating the 0 key.

÷The entire program is cleared.