Editing
The following procedure allows to record a CD within the specified tape length so that no music is interrupted in the middle at the ends of sides A and B.
18
Preparation | ÷Load a disc in the CD player. | @ |
|
÷Press the stop (7) key to set the unit in the stop mode.
÷Make sure the PGM indicator is extinguished.
$
The figure shows an example for the
0 | 7 | 6 |
| 4 | ¢ |
| 1 | ¡ |
: Keys and control used in the operations described on this page.
1Light the “EDIT” indicator.
Lights up. | Lights up. |
|
|
|
|
|
EDIT |
|
|
|
|
|
|
TRACK | EDIT | 1 | 2 | 3 | 4 | 5 |
| 6 | 7 | 8 | 9 | 10 | |
PGM |
| |||||
Go to step 2 within 5 seconds. | C_ __ |
|
|
|
|
|
If more than 5 seconds have elapsed, |
|
|
|
|
|
|
press the key again. | Blinks. |
|
|
|
|
|
|
|
|
|
|
|
2Enter the recording time of the tape.
Main unit
(Except for
TIME DISPLAY
÷By pressing the TIME DISPLAY key the set
÷The interval length can be adjusted with the skip keys (4,¢) in units of one minute (to a maximum of 99 minutes).
¢: increase by one minute.
4: decrease by one minute.
Go to step 3 within 5 seconds.
Remote control unit
(Except for
1 2 3
4 5 6
7 8 9
0 +10
÷When the interval length has been set using the numeric keys, the EDIT key does not have to be pressed after the interval has been set.
3Press the EDIT key once again. (Except for
EDIT
÷Recording within 99 minutes can be specified in minutes (2 digits).
÷While you can edit with a different time setting to that of the tape you are using, part of the tape may be left with nothing recorded on it, or the last track on side A or side B may be cut short.
The CD contents are edited as follows.
(1)The tape recording time input is divided by two, and tracks that can be accommodated in file A (which refers to tracks on tape side A) are selected in order of their track Nos.
(2)In a few seconds, the time left on tape side A is displayed, then file B (tracks on tape side B) is edited in the same manner.
÷The EDIT function may not operate properly for discs having only one track or having tracks of long duration such as classical music.
(“no FILE” is displayed.)
Playing or recording the edited contents
Press the 6key to start playback according to the edited content. The playback pauses at the beginning of the track edited for tape side B. Press the 6key again to continue playback.
When recording the edited content onto a tape, it is recommended to use the synchro recording or CCRS recording function of KENWOOD cassette decks.
÷Do not adjust the output level from this unit particularly during record- ing.
÷For details, see the instruction manual of the cassette deck.