Kenwood DPX-302 Switching the sound level meter display mode, 1Select the “Sound Options”, 2Select the desired equalizer pattern, Lit, C D 0, 1 :21, “Pop”, “Pop”, “Rock”

Muting the sound temporarily (Remote control unit only)

MUTE

C D 0 1	1 :21
	Blinks

÷Press again to resume the original volume.

÷The sound muting is also canceled when the volume is controlled.

Listening through headphonesInsert the headphone plug into the PHONES jack.

PHONES

÷The sounds from all speakers are cut off.

Let's put out some sound 15

XD SERIES (En)

STANDBY mode of ON/STANDBY ( ) switch

When the power cable plug of this unit is inserted into a receptacle, a minute current flows for memory protection. This status is referred to as the STANDBY mode, and the unit in the STANDBY mode can be turned ON from the remote control unit.

One-touch operation function

The power can also be turned ON by pressing the play key of the CD player, the play key of the cassette deck or the BAND key of the tuner.

It is also possible to turn the power ON by simply pressing the OPEN/CLOSE ( 0) Key.

÷When the CD or TAPE input is selected and a disc has been loaded in the disc tray or a tape has been loaded in the deck for use in playback, playback starts at the same time.

Changing the Tone (Selecting the equalizer pattern )Select the desired pattern according to the category of the played music.÷ EX.BASS will be canceled when an Equalizer pattern is set.

1Select the “Sound Options”

MENU SELECT

2Select the desired equalizer pattern.

		SELECT
Lit	“Rock”.......	Rock music
	“Pop” ........	Pop music
	“Classic” ...	Classic music
	“Jazz” .......	Jazz music
	“Flat” .........	Normal playback
Remote control	Each press of the key switches the
	mode as follows
	“Rock”.......	Rock music
SOUND	“Pop” ........	Pop music
	“Classic” ...	Classic music
	“Jazz” .......	Jazz music
	“Flat” .........	Normal playback

Changing the Tone (Selecting the bass boost )÷The factory setting is ON.÷The Equalizer setting will be canceled when EX.BASS is ON

			Operation
	Each press of the key switches the mode
INPUT	as follows
EX.BASS		“EX.BASS on” .... Extra Bass on
		“EX.BASS off” .... Cancel

Switching the sound level meter display mode

	Each press switches the
DEMO	modes as follows.
DISPLAY		“Display Auto”
		“Display 1”
		“Display 2”
		“Display 3”

C D 0 1 0 :00

This part changes in 3 stages, depending on the display mode.

÷ When “Display Auto” is selected, the display mode during CD playback changes to “Display 1”, “Display 2” and “Display 3” every time the track changes.

÷ “Display 3” is displayed regardless of the current music signal.