Tuner features

English

Tuning

1Press the SRC (source) button repeatedly to select the tuner mode. "TUNER" is displayed when the tuner mode has been selected.

2Press either the FM or AM button to select the band. Each time you press the FM button, the band switches between the FM1, FM2 and FM3.

Press the AM button to select the AM band.

3• Auto Seek Tuning

Press the ¢ button to seek higher frequencies.

Press the 4 button to seek lower frequencies.

•Preset station seek tuning

Press the ¢ button to move to the next preset station (i.e., the one with the next highest number), and the 4 button to move to the last preset station (i.e., the one with the next lowest number).

NOTE

If the frequencies stored at the preset numbers receive stations which were not originally memorized when traveling long distances, the preset number is not displayed. In such cases, pressing the 4/¢ button to use preset station seek will receive channel 1.

•Manual Tuning

Press the ¢ button to increase the frequency by one step. Press the 4 button to decrease the frequency by one step.

NOTE

•Please see the Function Set System about selecting tuning mode. (page 25)

•The ST indicator lights up when stereo broadcasts are being received.

Station Preset Memory

Store the frequency of a station. You can then recall that station with a single touch of a button.

1Select the band/ station that you want to have stored.

2Press the button (#1-6) that you want to use for the station, for at least two seconds.

The button number blinks once in the display to indicate that the data has been stored.

Recalling a Preset Station:

Press the preset station button (#1-6) for the desired station. The number of the recalled station is displayed.

NOTE

You can store six stations in each of the FM1, FM2, FM3, and AM bands.

Station Name Preset (SNPS)

You can assign names to radio stations with the Station Preset Memory. Up to 30 stations can be assigned names.

1Adjust the frequency to the station whose name you want to enter.

NOTE

This function cannot be available during the clock display.

2Press the NAME.S button for at least two seconds.

"Name Set" is displayed once the station name preset mode is entered.

The cursor will blink in the position where letters are entered.

3Press either the 4 or ¢ button to move the cursor to the desired position.

The 4 button moves the cursor to the left, and the ¢ button to the right.

4Each time the 38 button is pressed, the characters to be entered change as listed below.

Press the FM or AM button to display the desired character. Characters that can be displayed are as follows.

— 10 —