Alphabet (upper case)/Numerals/Symbols:
A ~ Z 0~9 / + – * = < > [ ]
Alphabet (lower case)/Numerals/Symbols: a ~ z 0~9 / + – * = < > [ ]
5Continue steps 3 and 4 until all the characters are chosen for the name.
NOTE
You can enter up to 8 characters for each name.
6Assigning Names
Press the NAME.S button.
The name of the station is stored in memory, and the Station Name Preset mode ends.
Also, if you make no input for 10 seconds, the name will be stored up to the point that you have entered, and the mode ends.
NOTE
•You can assign names to up to 30 FM/AM stations in all.
If you try to enter more than that, the station name stored the earliest will be the first one erased.
•If you want to change the name of a station, first display the name of the station (following steps 1 and 2 above), then change the letter(s) that you want by following steps 3 and 4.
Switching Display for Tuner
You can change the display used when listening to the radio.
Changing the Display:
Each time you press the DISP button, the display changes as follows:
Station frequency
SNPS name (only when being preset)
Character
Clock
— 11 —