General features
English
Switching Modes
Switching Modes:
Each time you press the SRC (source) button, the mode switches as follows:
▼
Tuner mode
▼
Tape mode
▼
CD mode
▼
External disc control mode 1
▼
External disc control mode 2/AUX mode
▼
Standby mode
Selecting standby mode:
Press the SRC button repeatedly and switch to "ALL OFF" . When "ALL OFF" is displayed, the standby mode is activated. The standby mode turns all functions off while leaving the power to the unit on. Use this mode when you want to have the display illuminated but don't want to listen to anything.
NOTE
•The mode switches to the next mode from any mode which cannot be used.
•The external disc control mode will differ depending on the unit that is connected.
•The AUX mode is available only when the changer / AUX switching adapter
During the AUX mode, "AUX INPUT" will show in the display. When the
Audio Control Setting
Adjust various parameters of sound quality.
1Press the AUD button for at least one second to enter the control mode.
2Selecting mode
Press either the 4 or ¢ button.
Each time the button is pressed, the adjustment mode will change.
Please refer to the following for the contents of the adjustment modes.
3Adjust each mode
Press the FM/AM button.
Please refer to the following for the adjusting values.
4Press the AUD button for at least one second to end the control mode.
"Balance" : Adjust the balance level. Setting values: Left 15 – Right 15
"Fader" : Adjust the fader level. Setting values: Front 15 – Rear 15
"NON FAD" : You can set the
Setting values: "NON FAD On" (ON) – "NON FAD Off" (OFF)
NOTE
This mode is available only when the
— 8 —