English

Installation (for TOYOTA, NISSAN Car etc.)

2CAUTION

When performing a check of the CD operation prior to installation, place this unit in a hirizontal position and perform a loading/eject of the CD.

■Installation

Install onto the car bracket using the supplied screws (M5 ⋅ 6 mm). The holes of the car bracket to use will differ depending on the car model.

Accessory2 (M4 ⋅ 6 mm)

Installation (for HONDA/ ACURA Car)

You can choose from three installation types to fit your car. Perform "Assembly" before installation.

■Assembly

Fit the projections on both sides of the Accessories 6 and 7 into the slits on the Accessory4.

Accessory4

Accessory0

 

(M5 ⋅ 6 mm)

Bottom

 

panel

 

When a ground wire is included in the wiring kit (which is sold separately), fasten the ground wire with the binding screw located on the rear panel of this unit.

Accessory1 or Accessory0 (M5 ⋅ 6 mm)

(The application

 

position of

Accessory6 (L)

Accessory5 is at the

bottom panel) Accessory0

Accessory3 (Only for NISSAN car)

(M5 ⋅ 6 mm) Accessory7 (R)

— 30 —