General features

English

Adjusting Time

Adjust the time.

1When the time is not displayed, first press the DISP button to display the time.

2Press the DISP button for at least one second to enter the clock adjustment mode.

3• Adjusting the hours

Press the FM button to advance the hours, or press the AM button to make the hours go back.

•Adjusting the minutes

Press the ¢ button to advance the minutes, or press the 4 button to make the minutes go back.

4Press the DISP button to end the clock adjustment mode.

Switching Display

You can switch the display during the standby mode as mentioned below.

Switching the Display During the Standby Mode:

Each time you press the DISP button during the standby mode, the display switches as follows:

Character+Graphic

Clock+Graphic

Clock

Spectrum Analyzer Display Selection

You can select the display to enjoy sounds with eyes.

Switching the Preset Spectrum Analyzer Display:

1Press the COL button for at least one second. "SPEANA CTRL" is displayed once the Spectrum Analyzer Display Selection mode is entered.

2The spectrum analyzer name currently set appears in the display.

Each time you press the COL button, the spectrum analyzer display switches as follows;

▼The spectrum analyzer display switches in

"SPEANA scan" sequence for 10 secconds each.

▼

"Peak Hold"

▼

"Loop"

▼

"Radar"

▼

"Oval Meter"

▼

"Searchlight"

▼

"Side Wave"

▼

"Champagne"

3Press the COL button for at least one second to end the Spectrum Analyzer Display Selection mode.

— 8 —