Aga Ranges dc6 owner manual Levelling And Mobility Wheels, Installation/Levelling

LEVELLING AND MOBILITY WHEELS

INSTALLATION/LEVELLING

The cooker is fitted with mobility rollers, two at the rear and two at the front.

The DC6 is designed to stand on a flat and level surface, however, any unevenness may be overcome by adjusting the four levelling feet, one at each corner of the base plate. The adjusting screws are accessed by removing left and right hand hotplate castings (See section ‘To Remove Hotplate Castings - Servicing Section Page 50). To raise the cooker turn screw clockwise, to lower turn screw anti-clockwise.

Fig. 5 DESN 512391 B

There are rollers on the base of the cooker to allow for positioning.

When the cooker is in the correct position the four levelling feet can be adjusted to level the cooker. THE FEET MUST BE LOWERED ENOUGH TO PREVENT THE COOKER ROLLING OUT OF POSITION. (See Fig. 5)

12