•If a wrong security code is entered, "ERROR" is displayed. Enter a correct security code.
In Standby mode
Touch Sensor Tone
Setting the operation check sound (beep sound) ON/OFF.
Display | Setting |
"BEEP ON" | Beep is heard. |
"BEEP OFF" | Beep canceled. |
In Standby mode
Manual Clock Adjustment
1Select Clock Adjustment mode
Push the Control knob towards [FM] or [AM]. Select the "CLK ADJ" display.
2Enter Clock Adjust mode
Press the Control knob for at least 1 second. The clock display blinks.
3Adjust the hours
Push the Control knob towards [FM] or [AM].
Adjust the minutes
Push the Control knob towards [4] or [¢].
4Exit Clock adjustment mode Press the [MENU] button.
In Standby mode
Indirect Lighting
You can illuminate the area around the display with soft indirect lighting.
Display | Setting |
"LGHT ON" | Turns indirect lighting on. |
"LGHT OFF" | Turns indirect lighting off. |
Display Illumination Control
This function turns off the display when you perform no operation for 5 seconds. This function is effective when you are driving at night.
Display | Setting |
"DISP ON" | Keeps the display on. |
"DISP OFF" | Turns off the display when you perform no |
| operation for 5 seconds. |
•When the display is off, pressing any key will turn on the display.
•When the display is off, you cannot perform any operation except for the following:
•Volume
•Attenuator
•Selecting the source
•Ejecting the disc
•Turning off the power
•During function control, such as the Menu System, the display stays on.
In Standby mode
Dimmer
Dimming this unit’s display automatically when the vehicle light switch is turned ON.
Display | Setting |
"DIM ON" | The display dims. |
"DIM OFF" | The display doesn’t dim. |
In Standby mode
Switching preout
Alternating the preout between the rear and subwoofer. (With the subwoofer the sound outputs without being effected by fader control.)
Display | Setting |
"SWPRE R" | Rear preout. |
"SWPRE SW" | Subwoofer preout. |
English 27