Manuals / Brands / Home Audio / CD Player / Kenwood / Home Audio / CD Player

Kenwood DPX-MP2090U Installation, USB Device Connection

1 44

Download 44 pages, 861.47 Kb

Installation

When performing a check of the CD operation prior to installation, place this unit in a horizontal position and perform a loading/eject of the CD.

Installation

Install onto the car bracket using the supplied screws (M5 × 6 mm, M5 × 7 mm). The holes of the car bracket to use will differ depending on the car model.

When a ground wire is included in the wiring kit (which is sold separately), fasten the ground wire with the binding screw located on the rear panel of this unit.

Screw (M4× 8) (commercially available)

Accessory3

(M5 × 6 mm) or Accessory4

(M5 × 7 mm) Accessory2

(Only for NISSAN car)

•During installation, do not use any screws except for those provided. The use of different screws might result in damage to the main unit.

•Damage may occur if a screwdriver or similar tool is used with excessive force during the installations.

USB Device Connection

1Remove the cap and connect the USB cable (Accessory5).

2Connect the USB device to the unit using the supplied cable.

36 English

Contents

Page Safety precautions Notes About CDs About USB device About AAC, MP3 and WMA 2WARNING 2CAUTION How to reset your unit Cleaning the Unit About "Media Manager" of PC application attached to DPX-MP2090U About DAB Tuner control <Auto Ensemble Memory Entry <Automatic Switching DAB priority The marking of products using lasers (Except for some areas) Handling CDs When using a new CD CD accessories CD cleaning Removing CDs Notes on Use of the USB device Available USB devices About the Connection of the USB device About USB device Operation Playable Audio file Playable AAC file Playable MP3 file Playable WMA file Playable Storage media Playing order of the Audio file Example •Playing order •File search •Folder search Power Selecting the Source Volume Attenuator System Q Audio Control Adjusting the detail of Audio Control Audio Setup Speaker Setting Subwoofer Output TEL Mute Switching Display Tuning Tuning Mode Direct Access Tuning Station Preset Memory Auto Memory Entry Preset Tuning Frequency Step Setting TV Tuning TV channel Preset Memory Preset TV Tuning Direct TV Tuning Playing CD & Audio file Playing USB device Playing External Disc Fast Forwarding and Reversing Track/File Search Disc Search/Folder Search Direct Track/File Search Direct Disc Search Track/File/Disc/Folder Repeat Scan Play Random Play Magazine Random Play All Random Play Select mode File Select mode Folder Select 1 mode Folder Select 2 mode Switching the Play mode Letter Seek Text/Title Scroll Menu System Activating Security Code Deactivating Security Code Touch Sensor Tone Manual Clock Adjustment Indirect Lighting Display Illumination Control Dimmer Built-inAmp Setting Dual Zone System Setting B.M.S. (Bass Management System) B.M.S. Frequency Offset AMP Control Auxiliary Input Display Setting Text Scroll Built-inAuxiliary input Setting CD Read Setting Voice Index ACDrive firmware version display Unique ID display Audio Preset Memory Audio Preset Recall Loading and Replacing the battery Basic operations Dual Zone System In Tuner source In Disc/USB source In TV source Accessories Installation Procedure Page Installation USB Device Connection General Tuner source Disc source Audio file source USB device source The messages shown below display your systems condition Page FM tuner section AM tuner section CD player section USB Interface Audio section