There are 2 tuning methods autonmtic and manual. Select either method according to your preference and the strength of station signals.
Press TUNING/CH <:1/ _> once to begin
automatic tuning.
Automatic tuning is effective when station signals are
Press C> to tune into a higher frequency.
strong and there is no interference.
Press <:1to tune into a lower frequency.
243
• When you _ule into a station, the frequency of the received station is shown in the front panel display.
• To search for another station, press TUNING CH <1 C> once more.
• If the tuning search does not stop at the desired station because the station signals are weak, try using the manual tuning method.
Rotate the INPUT selector (or press TUNER
on the remote control) to select TUNER as
the input source.
INPUT
| or |
_ | TUNER |
Front panel | Remote control |
Press FM/AM on the front panel to select the
reception band (FM or AM).
FM or AM appears in the front panel display.
FM/AM
Press TUN MODE on the front panel so that
the AUTO indicator lights up in the front
panel display.
_o,_,.pAUTO
Lights up
20