Yamaha RX-497 owner manual •Direct Number Access mode

_Ij_I.___I:/IiI:I;y__yl][oIIIIhT/hT[J

•Direct Number Access mode

1Repeat step 1 in "Basic XM Satellite Radio operations".

2Press SEARCH MODE on the front panel (or

SRCH MODE on the remote control) repeatedly to select the All Channel Search mode or the Category Search mode.

ALL CH SEARCH or CAT SEARCH appears in the front panel display.

or

Front panel Remote control

You can use this feature to store up to 40 XM Satellite Radio channels (8 preset channel numbers in each of the 5 preset channel groups, AI to E8). You can then easily recall any preset channel by selecting the preset channel

group and the preset channel number as described in "Preset Search mode" on page 32.

2,5

34

Search for the XM Satellite Radio channel

you want to set as a preset channel.

To search for the desired channel, pert_rm tile steps

in "All Channel Search mode", "Category Search mode" or "Direct Number Access mode".

Press numeric buttons on the remote control sequentially to enter the desired channel number.

Press MEMORY on the front panel or on the remote control.

The MEMORY indicator flashes in the front panel

display for approximately 5 seconds.

or

Front panel Remote control

MEMORY

Flashes

Press ENT. on the remote control to immediately tune into the channel with fewer than three digits for the channel number.

•If no button is pressed within a ti:w seconds after entering one- digit or two-digit chmmel number, this unit automatically confirnls the entered channel number and tunes into the selected channel.

•Pressing a button other than the numeric buttons or ENT. on the remote control cancels the Direct Number Access procedure.

33