Yamaha RX-497 Connecting the AM loop antenna, 4Release the tab, Set up the AM loop antenna

Connecting the AM loop antenna

1 Set up the AM loop antenna.

Press and hold the tab.

3Insert the AM loop antenna lead wires into the AM ANT terminal.

5Repeat steps 2 to 4 to insert the AM loop antenna lead wires into the GND terminal.

6Orient the AM loop antenna for the best reception.

•The AM loup antenna should be placed away l?om this unit.

•A properly installed uutdour antenna provides clearer receptiuu than an indour one. If you experience puor reception quality, an outdour antenna may improve the quality. It is recommended that you should connect a 5 to 10 m of vinyl-covered wire to the AM ANT terminal and extend it outdoors l?um a window. Cuusult your nearest authorized YAMAHA dealer or service center about uutdoor antennas.

•The AM luop antenna should always be cunuected, even if an outdour AM antenna is connected to this unit.

4Release the tab.

13