Samsung TXN3098WHF/TXN3298HF manual Connecting to a Cable Box that Descrambles All Channels

I N S T A L L AT I O N

Connecting to a Cable Box that Descrambles All Channels

1

Find the cable that is con- nected to the ANTENNA OUT terminal on your cable box.

2

Connect the other end of this cable to the VHF/UHF antenna

terminal on the back of the TV.

▼ This terminal might be labeled

“ANT OUT,” “VHF OUT,” or simply, “OUT.”

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of coaxial cable. (These items are available at most electronics stores.)

1

Find and disconnect the cable that is connected to the ANTENNA IN terminal on your

cable box.

▼ This terminal might be labeled

“ANT IN,” “VHF IN,” or simply, “IN.”

2

Connect this cable to a two-way splitter.

3

Connect a coaxial cable between an OUTPUT ter- minal on the splitter and the IN terminal on the cable box.

16