il'.JIF:lgdld[eiF:Idlel_l:[_e]_te]ld[J
•Adjusting the BALANCE control
Adjusts the sound output balance of the left and right
speakers to compensate fbr sound imbalance caused by speaker locations or listening room conditions.
gALAHCE
•Using the PURE DIRECT button
Routes input signals from your audio sources so that the input signals bypass the BASS, TREBLE, BALANCE and LOUDNESS controls, thus eliminating any alterations to the audio signals and creating the purest possible sound.
o
PURE _I_ECT
©
•Adjusting the BASS and TREBLE controls
Adjust the high and low frequency response.
BASS
Increases or decreases the low frequency response.
TREBLE
Increases or decreases the high frequency response.
o_s | _REgLE |
•Adjusting the LOUDNESS control
Retains a full tonal range at any volume level, thus
compensating for the human ears' loss of sensitivity to
high and
r__,llj/l'olAVl
If the PURE DIRECT button is turned on with the LOUDNESS control set at a certain level, the inpm signals bypass the LOUDNESS control, resulting in a sudden increase in the sound ontput level. To prevent your ears or the speakers from being undesirably damaged, be sure to press the PURE DIRECT button AFTER lowering the sound output level or AFTER checking that the LOUDNESS control is properly set.
1Rotate the LOUDNESS control on the front panel to the FLAT position.
LOUDNESS
C©I:
, ; 7
Rotate VOLUME on the front panel (or press VOLUME +/- on the remote control) to set the sound output level to the loudest listening level that you would listen to.
or
Front panel | Remote control |
|
3Rotate the LOUDNESS control until the desired volume is obtained.
LOUDNESS
FL_
16
