Yamaha RX-497 •Ac Outlets Switched, I tflll qlh, Press MASTER ON/OFF on the front panel

I[";'tfll'l_ql['h'_

Plug the power supply cord into the AC wall outlet after

all other connections are complete.

AC power supply cord

(General model)

AC OUTLET(S)

•AC OUTLET(S) (SWITCHED)

Australia model	1 outlet
Other models	2 outlets

Use these outlets to connect the power supply cords from

your other components to this unit. The outlets supply

power to any connected components whenever the power

of this unit is turned on. For information on the maximum

power (total power consumption of components), see

"SPECIFICATIONS" on page 45.

When all connections are complete, turn on the power of this unit.

1

Press MASTER ON/OFF on the front panel

inward to the ON position to turn on the

power of this unit.

Main Zone of this unit turns on.

•You can set Main Zone of this unit to the standby mode by pressing MAIN ZONE ON/OFF on the front panel

or STANDBY on the remote control.

Press MAIN ZONE ON/OFF on the front panel or POWER on the remote control to turn Main Zone on

again.

•Press MASTER ON/OFF on the front panel again to

release it outward to the OFF position to turn offthis unit.

--'4:--

While MASTER ON/OFF on the front panel is pressed inward to the ON position, you can turn on Zone 2 or set it to the standby mode independently (see page 38).

14