Lincoln Electric SVM194-A service manual C4.2, Power Plug Kit K802D

Remote Control Kit K924-5

Contains remote control rheostat and 100 ft. (30.5 m) cable for adjusting the OCV at the welding site.

Return to Section TOC Return to Master TOC

Return to Section TOC Return to Master TOC

Return to Section TOC Return to Master TOC

C4.2			ACCESSORIES		C4.2
OPTIONAL FEATURES			(Field Installed)	TIG OPTIONS
GENERAL OPTIONS				TIG Module K930-2
				Provides high frequency and shielding gas control for
				AC and DC GTAW (TIG) welding applications. Its com-
		WARNING
				pact case is designed for easy carrying, complete with
				a handle. High frequency bypass is built in.
Pipe Thawing with an arc welder can cause fire,
				Additionally, the K936-3 control cable is required if
explosion, damage to electric wiring or to the arc				remote control is used. If remote control is not used the
welder if done improperly. The use of an arc welder				K936-4 control cable is required.
for pipe thawing is not approved by the CSA, nor is				PTA-26V TIG Torch K1783-9
it recommended or supported by Lincoln Electric.
------------------------------------------------------------------------				Air cooled 200 amp torch equipped with valve for gas
Power Plug Kit K802D				flow control. 25Ft. length.
A power plug kit for the auxiliary power receptacles is				Magnum Parts Kit For PTA-26V TIG Torch KP509
available. (Provides a plug for each receptacle.)
Spark Arrestor Kit K903-1				Control Cable K936-4 (required for TIG Module)
Includes a heavy gage steel, approved spark arrestor,				Control cable for connecting the K930-2 TIG Module.
clamp and adapter for mounting to the muffler exhaust				Arc Start Switch K814 (required for TIG Module)
pipe.				Comes with a 25ft.(7.6m) cable.
TRAILER K953-1				Attaches to the TIG torch for convenient finger control.
Two-wheeled trailer with optional fender and light package.				Contactor Kit K938-1 (required for TIG Module)
For highway use, consult applicable federal, state, and local
laws regarding possible additional requirements. There is a				Provide “Cold” tungsten Tip when welding with the TIG
choice of 2 hitches, a fender & a light package.				Module.
Ball Hitch K958-1	K958-2			Control Cable Extension K937-45
Lunette Eye Hitch				Allows the TIG Module to be operated at distances up
Fender & Light Kit		K959-1		to 200 ft. from the power source.Available in 45 ft.
Cable Rack K965-1				(13.7m).
Service Indicator Kit K1858-1				Water Valve Kit K844-1
Provides a GO / NO-GO visual indication of air clean-				For use with a water-cooled TIG torch. Installs inside
er element useful service life. Filter service based on				TIG Module.
restriction readings allows the longest life possible
from the filter and best engine protection.

STICK OPTIONS

ACCESSORY SET K704

Includes 35 feet (10 m) of electrode cable and 30 feet (9 m) of work cable, headshield, work clamp and elec- trode holder. Cable is rated at 500 amps, 60% duty cycle.

Return to Section TOC Return to Master TOC

CLASSIC® 300D & 300G