Normal Indicator Display | Kyocera FS-1010 specification

Indicators

3.3.4Normal Indicator Display

The following displays appear during normal printer operation.

				Indicator	KM-NET for Clients display	Description
					Cancelling data	Data inside the printer is being canceled.
						The indicators light in sequence from the top, then
						go off in sequence from the bottom. This process is
						repeated twice.
						repeated twice.
						When the printer is switched on for the first time
						after the toner container is installed, (Adding


						toner) also appears.

					Please wait	The printer is warming up and is not ready to print.
						The indicators light in sequence twice from top to
						bottom.
						When the printer is switched on for the first time
						When the printer is switched on for the first time
						after the toner container is installed, (Adding
						toner) also appears.
						toner) also appears.

					Processing	The printer is receiving data.



					Processing	The printer is processing data.
					Waiting	The printer is waiting for the end-of-job command
					Waiting	The printer is waiting for the end-of-job command
						before printing the last page. Pressing the		key
						allows you to obtain the last page immediately.

					Form Feed Timeout	The printer is printing the last page after a waiting
						period.
					Ready	The printer is ready to print.

						The printer is offline. The printer stores but does
						not print received data.

					Sleeping	The printer is in sleep mode. The	indicator
						flashes at 5-second intervals and all other
						indicators go off. The printer wakes from Sleep
						mode whenever a key on the operator panel is


						pressed, the cover is opened or closed, or data is
						received. The printer then warms up and goes


						online. (You can set the amount of time before the
						printer enters sleep mode from the KM-NET for
						Clients utility.)

3-13

Image 37

Kyocera FS-1010 manual Normal Indicator Display, Indicator KM-NET for Clients display Description

Contents

Printer Regarding Tradenames License Limited WarrantyLimitation of Remedies General Agfa Japan License Agreement Guidelines Typeface Trademark Acknowledgement Contents Fonts Paper SelectionAppendix a Options Appendix B Host Computer Interface Glossary-1 Appendix C Printer SpecificationsIndex-1 Introduction Description Guide to the Manuals Guide to the Operation Guide Basic Operations Operator Panel Keys IndicatorsReference Name Status Meaning Reference Name Function Status Error Log Installation OptionsSoftware Version Hardware Information Interface Information Toner GaugeKIR Test Pattern Maintenance Toner Container Replacement Interval Toner Container ReplacementToner Kit to be Used Replenishing Toner Take the new toner container from the bag. Hold it with Lock Lock position. Lock lever #2 is automatically locked Printer Interior Cleaning Never stand the process unit on end Slots in the printer Troubleshooting General Guide Symptom Check Items Corrective Action Clean the charger wire Print Quality ProblemsPrinted Results Corrective Action Contact your Kyocera Mita dealer Confirm Toner indicator Check the EcoPrint settingTry setting the thin paper mode Check the paper size setting Indicators Maintenance Messages There is no cassette in the feeder, or TheprintjobcannotbedoneatcurrentresolutionCassette is not inserted properly After reinserting the paper cassette, you should be Scanner motor error 4000 error Errors Requiring Service Personnel AttentionScanner pin-photo error 4200 error Eraser error 5300 error None Waste toner reservoir is full Error ErrorController RAM read/write error F020 error Waste toner reservoir is full Engine ROM check sum error F050 error Communication error F040 error Error Messages Make sure to turn the printer power off before inserting Printer power is onThis message appears when the printer is in the ready Printer has halted because you attempted to insert Indicator KM-NET for Clients display Description Normal Indicator Display Jam at the Face-down and Face-up Trays Correcting a Paper Jam Jam Inside the Printer Jam at the Paper Cassette Into the printer Paper Selection Specifications Paper SpecificationsSpecification General Guidelines Condition of the Paper Selecting the Right PaperComposition Paper Size Basis WeightPaper Sizes for Paper Feeding Smoothness Thickness Caliper Moisture ContentPaper Grain Other Paper Properties Special Paper Transparency SpecificationsTransparency overhead projection film Adhesive-backed label Adhesive-Backed Labels Envelopes Adhesive Label SpecificationsColored Paper Preprinted Paper Recycled Paper Paper Type Paper Source MP Tray Paper Weight Paper Type CassettePaper Type Fonts Internal Fonts Internal Scalable and Bitmap Fonts and Kpdl Fonts List of Fonts List of Fonts List of Fonts Font Kpdl Fonts List of Fonts Appendix a Options Memory CompactFlash Card Available Options YES Expansion Memory Installation Dimm to be used Installing the Dimm Insert the Dimm into the Dimm socket so that the notches on To remove a Dimm Testing the Expansion Memory Setting the Printer Driver Memory CompactFlash Card Push it in all the way Network Interface Card Appendix B Host Computer Interface Parallel Interface Interface SignalsParallel Interface Communication Modes Pin In/out Description Table B.1 Parallel Connector Pin Assignment Paper Empty PError Pin Data 0 1 to Data 7 8 Pins 2 toReset nInit Pin Error* nFault Pin Select In nSelectIn Pin Power Ready Pin USB Interface Specifications 1 RS-232C Interface Serial Interface Option Table B.4 RS-422A Signal Pin Assignments SG Signal Ground Pin2 RS-422A Interface DTR Data Terminal Ready Pin Serial Connector Overview of Signals RS-422ARDB Receive Data Pin RDA Receive Data Inverted Pin SDB Send Data Pin SDA Send Data Inverted Pin H1 Baud rate RS-232C/RS-422A ProtocolH2 Data bits H3 Stop bits H5 Protocol logic Prescribe Frpo D0 CommandH6 Buffer nearly-full threshold H7 Buffer nearly-empty threshold RS-232C Cable Connection Connecting the Printer to the ComputerObtain a Suitable RS-232C Cable Cursor with Settings, then click on Control Panel from among \MODE LPT1=COM1 Appendix C Printer Specifications Printer Specifications Power consumption Power requirementsDimensions Weight Glossary First mode Cassette modeDpi dots per inch IEEE1284 MB mega byte Prescribe commandsMP tray Offline Status Sleep modeUSB Universal Serial Bus Index EcoPrint Glossary-2Emulation Glossary-2Envelope Index-3