Lincoln Electric SVM194-A service manual C4.3, Magnum Spool Gun K487-25 Wire Feed Module K623-1

Return to Section TOC Return to Master TOC

Return to Section TOC Return to Master TOC

Return to Section TOC Return to Master TOC

Return to Section TOC Return to Master TOC

C4.3		ACCESSORIES		C4.3
WIRE FEEDER OPTIONS			Magnum Spool Gun K487-25
Wire Feed Module K623-1			Hand held semiautomatic wire feeder requires SG
Provides constant	voltage (CV) output with improved		Control Module. 25 ft. length.
arc stability for Innershield welding. Excellent for MIG			SG Control Module K488 (For Magnum Spool Gun)
welding. Recommended wire feeders are the LN-7,			The interface between the power source and the
LN-23P and LN-25. (Factory installed on the K1643-2).
			spool gun. Provides control of wire speed and gas
LN-25 Wire Feeder K449			flow.
Portable CC/CV unit for flux-cored and MIG welding.			Input Cable K691-10 ( For SG Control Module)
Includes Gas Solenoid & Internal Contactor. Requires			For Lincoln engine drives with 14-pin MS-type connec-
Wire Feed Module.			tion, separate 115V NEMA receptacle and output
Remot Voltage Control Kit for LN-25 K444-2			stud connections. 10 ft. length.
Provides 25 ft. (7.5m) of remote output voltage control
and output jumper (2 and 4) for machines having 14
pin MS-type connector.

ForMagnum®self-shielded350 Innershieldwire with 15Gunft. for(4.5m)LN-25cableK126. For-2

.062-3/32” (1.6-2.8mm) wire.

Magnum® 300 MIG Gun for LN-25 K1802-1

With 15 ft. (4.5m) cable. For .035”-.045” (0.9-1.2mm) gas shielded (Includes Connector Kit).

LN-23P Wire Feeder K316L-1

Portable CV unit for Innershield pipe welding. Control cable operates contactor inside Wire Feed Module for “cold” electrode. Requires LN-23P Adapter Kit (K350- 1) and Gun and Cable Assembly.

LN-23P Adapter Kit K350-1

Required to adapt LN-23P to any Lincoln power source. Makes 14 pin connection at power source.

Magnum® 250 Innershield Gun for LN-23P K355-10For lighter weight and easier handling. Rated 250 amps, 60% duty cycle. For .068 through 5/64” (1.7 through 2.0 mm) Innershield wire and includes reduced speed switch. For pipewelding, an M11476 62° gun tube is recommended.

62° gun tube for PipeWelding KP1909-1 Recommended modification for K355-X or K345-x guns with 90° gun tubes. Compatible with K126-1,-2,K264-8 and K355-10.

CLASSIC® 300D & 300G