Lincoln Electric SVM194-A service manual 82TROUBLESHOOTING and REPAIRF-82, Generator Armature

Return to Section TOC Return to Master TOC

F-82TROUBLESHOOTING AND REPAIRF-82

GENERATOR ARMATURE

REMOVAL AND REPLACEMENT PROCEDURE (continued)

FIGURE F.16 – BLOWER PADDLE REMOVAL

ROPE SLING

Return to Section TOC Return to Master TOC

Return to Section TOC Return to Master TOC

Return to Section TOC Return to Master TOC

PROCEDURE

1. Turn the engine OFF.

2. Perform the Alternator Rotor Removal pro- cedure.

3. Perform the Alternator Stator Removal pro- cedure.

4. Perform the Generator Frame Removal pro- cedure.

5. Using the rope sling, support the armature.

6. Make sure the engine is supported with the wood or steel blocks.

7. With the 5/8" wrench, remove the eight bolts and lock washers holding the blower paddles and the armature to the engine flywheel. See Figure F.16.

8. With the armature supported and “balanced” in the rope sling, carefully rotate the armature 1/8 turn in either direction to release.

BLOWER PADDLE BLOWER PADDLE/ARMATURE MOUNTING BOLTS (8)

CAUTION

The armature is now free to be removed from the engine.

Replacement:

9. Support the armature with the rope sling. Mount the armature to the engine, rotating it 1/8 of a turn in either direction to achieve proper attachment. Before removing the rope sling, be careful to support the arma- ture with the wood or steel blocks under the engine. With the 5/8" wrench, install the eight bolts and lock washers that attach the blower paddles and the armature to the engine flywheel.

10. Perform the replacement procedures accord- ing to each of the following:

Generator Frame Removal and Replacement

Alternator Stator Removal and Replacement

Alternator Rotor Removal and Replacement

CLASSIC® 300D & 300G