Lincoln Electric SVM194-A service manual Wire Feeder Options, C2.3

Return to Section TOC Return to Master TOC

Return to Section TOC Return to Master TOC

Return to Section TOC Return to Master TOC

Return to Section TOC Return to Master TOC

C2.3		ACCESSORIES		C2.3
WIRE FEEDER OPTIONS
Wire Feed Module K623-1			Magnum Spool Gun K487-25
Provides constant voltage (CV) output with improved			Hand held semiautomatic wire feeder requires SG
arc stability for Innershield welding. Excellent for MIG			Control Module. 25 ft. length.
welding.	Recommended wire feeders are the LN-7,		SG Control Module K488 (For Magnum Spool Gun)
LN-23P and LN-25. (Factory installed on the K1643-2).			The interface between the power source and the
LN-25 Wire Feeder K449			spool gun. Provides control of wire speed and gas
Portable CC/CV unit for flux-cored and MIG welding.			flow.
Includes Gas Solenoid & Internal Contactor. Requires			Input Cable K691-10 ( For SG Control Module)
Wire Feed Module.			For Lincoln engine drives with 14-pin MS-type connec-
Remot	Voltage Control Kit for LN-25 K444-2		tion, separate 115V NEMA receptacle and output
Provides 25 ft. (7.5m) of remote output voltage control			stud connections. 10 ft. length.
and output jumper (2 and 4) for machines having 14
pin MS-type connector.

ForMagnum®self-shielded350 Innershieldwire with 15Gunft. for(4.5m)LN-25cableK126. For-2

.062-3/32” (1.6-2.8mm) wire.

Magnum® 300 MIG Gun for LN-25 K1802-1

With 15 ft. (4.5m) cable. For .035”-.045” (0.9-1.2mm) gas shielded (Includes Connector Kit).

LN-23P Wire Feeder K316L-1

Portable CV unit for Innershield pipe welding. Control cable operates contactor inside Wire Feed Module for “cold” electrode. Requires LN-23P Adapter Kit (K350- 1) and Gun and Cable Assembly.

LN-23P Adapter Kit K350-1

Required to adapt LN-23P to any Lincoln power source. Makes 14 pin connection at power source.

Magnum® 250 Innershield Gun for LN-23P K355-10For lighter weight and easier handling. Rated 250 amps, 60% duty cycle. For .068 through 5/64” (1.7 through 2.0 mm) Innershield wire and includes reduced speed switch. For pipe welding, an M11476 62° gun tube is recommended.

62° gun tube for pipe welding KP1909-1 Recommended modification for K355-X or K345-x guns with 90° gun tubes. Compatible with K126-1,-2,K264-8 and K355-10.

CLASSIC® 300D & 300G