Lincoln Electric SVM194-A Accessories, Optional Features, TIG Options, Stick Options

Return to Section TOC Return to Master TOC

Return to Section TOC Return to Master TOC

Return to Section TOC Return to Master TOC

Return to Section TOC Return to Master TOC

C1.2		ACCESSORIES			C1.2
OPTIONAL FEATURES		(Field Installed)	Remote Control Kit (K924-4) - Contains switch,
GENERAL OPTIONS			receptacle, remote control rheostat, and 100 ft (30.5m)
			cable for adjusting the OCV at the welding site.(For
	WARNING		Codes below 10911.)
			Remote Control Kit (K924-5) - Contains remote con-
Pipe Thawing with an arc welder can cause fire,			trol rheostat and 100 ft. (30.5 m) cable for adjusting
			the OCV at the welding site. (For Codes 10911 and
explosion, damage to electric wiring or to the arc			above.)
welder if done improperly. The use of an arc welder			Remote Control Kit (K2464-1) - Contains remote
for pipe thawing is not approved by the CSA, nor is			control rheostat (for adjusting the CC “STICK OVC),
it recommended or supported by Lincoln Electric.			remote control potentiometer (for adjusting the CV
------------------------------------------------------------------------			“WIRE” OCV) and 100 ft.		(30.5 m) cable.
Power Plug Kit (K802D) - A power plug kit for the aux-			TIG OPTIONS
iliary power receptacles is available. (Provides a plug
for each receptacle.)			TIG Module (K930-2)- Provides high frequency and
GFCI Receptacle Kit (K1690-1) - Includes one UL			shielding gas control for AC and DC GTAW (TIG) weld-
approved 115V ground fault circuit interrupter duplex			ing applications. Its compact case is designed for easy
type receptacle with cover and installation instructions.			carrying,	complete with	a handle. High frequency
Replaces the factory installed 115V duplex receptacle.			bypass	is built in.The K938-1 Contactor Kit must be
Each receptacle of the GFCI duplex is rated at 20			field installed in the TIG Module when used with a ZR-
amps. Maximum total current from the GFCI duplex is			10. Additionally, the K936-3 control cable is required if
limited to 20 amps. See the		MAINTENANCE section	remote control is used. If remote control is not used the
for detailed information on testing and resetting the			K936-4 control cable is required.
GFCI receptacle.			PTA-26V TIG Torch K1783-9-Air cooled 200 amptorch
Spark Arrestor Kit (K903-1) - Includes a heavy gage			equipped with valve for gas flow control. 25Ft. length.
steel, approved spark arrestor, clamp and adapter for			Magnum Parts Kit For PTA-26V TIG Torch KP509
mounting to the muffler exhaust pipe.
K953-1 TRAILER - Two-wheeled trailer with optional fender			Remote Control Cable (K936-4) - Control cable for
and light package. For highway use, consult applicable feder-			connecting the K930-2 TIG Module to a ZR-10 not
al, state, and local laws regarding possible additional require-			equipped with a K892-1 Remote Kit. 9-Socket to a
ments. There is a choice of 2 hitches, a fender & a light pack-			grounded 115 V plug and a 6 pin MS-connector.
age.			(Contains circuits 31, 32, and ground)
K953-1 Trailer			Arc Start Switch K814
K958-1 Ball Hitch
K958-2 Lunette Eye Hitch			Contactor Kit K938-1
K959-1 Fender & Light Kit
K965-1 Cable Rack			Control Cable Extension K937-45-Cable is 45Ft. in
OIL DRAIN KIT K1586-1 - Includes ball valve, hose			length.
and clamp.			Water Valve Kit K844-1-For use with a water-cooled
STICK OPTIONS			TIG torch. Installs inside TIG Module.

K704 ACCESSORY SET - Includes 35 feet (10 m) of electrode cable and 30 feet (9 m) of work cable, head- shield, work clamp and electrode holder. Cable is rated at 500 amps, 60% duty cycle.

CLASSIC® 300D & 300G