Lincoln Electric SVM194-A service manual TIG Options, Stick Options

Return to Section TOC Return to Master TOC

Return to Section TOC Return to Master TOC

Return to Section TOC Return to Master TOC

Return to Section TOC Return to Master TOC

C3.2		ACCESSORIES						C3.2
OPTIONAL FEATURES		(Field Installed)	control rheostat and 100 ft. (30.5 m) cable for adjust-
			Remote	Control Kit	(K924-5)	-	Contains remote
GENERAL OPTIONS			ing the OCV at the welding site. (For Codes 10911 and
			above.)
			Remote	Control Kit	(K2464-1)	- Contains remote
	WARNING
			control rheostat (for adjusting the CC “STICK” OCV),
			and 100ft.(30.5m) cable. (See			Wiring/Connection
Pipe Thawing with an arc welder can cause fire,
			Diagram Section G)
explosion, damage to electric wiring or to the arc
welder if done improperly. The use of an arc welder			TIG OPTIONS
for pipe thawing is not approved by the CSA, nor is
it recommended or supported by Lincoln Electric.			TIG Module (K930-2)- Provides high frequency and
------------------------------------------------------------------------			shielding gas control for AC and DC GTAW (TIG) weld-
Power Plug Kit (K802D) - A power plug kit for the aux-			ing applications. Its compact case is designed for easy
			carrying, complete with a handle.				High	frequency
iliary power receptacles is available. (Provides a plug			bypass	is built in. The K936-4			control	cable is
for each receptacle.)			required.
GFCI Receptacle Kit (K1690-1) - Includes one UL			PTA-26V TIG Torch (K1783-9) - Air cooled 200 amp-
approved 115V ground fault circuit interrupter duplex			torch equipped with valve for gas flow control. 25Ft.
type receptacle with cover and installation instructions.			length.
Replaces the factory installed 115V duplex receptacle.
Each receptacle of the GFCI duplex is rated at 20			Magnum Parts Kit For PTA-26V TIG TorchKP509
amps. Maximum total current from the GFCI duplex is
limited to 20 amps. (For Codes 11112, 11113). See			Control Cable (K936-4) (required for TIG Module) -
MAINTENANCE section for detailed information on			Control Cable for connecting the K930-2 Tig Module.
testing and resetting the GFCI receptacle.			Arc Start Switch (K814) (required for TIG Module) -
Spark Arrestor Kit (K903-1) - Includes a heavy gage
			Comes with a 25ft.(7.6m) cable. Attaches to the TIG
steel, approved spark arrestor, clamp and adapter for			torch for convenient finger control.
mounting to the muffler exhaust pipe.			Contactor Kit (K938-1) (required for TIG Module) -
TRAILER (K953-1) - Two-wheeled trailer with optional fender
			Provide “Cold” tungsten Tip when welding with the TIG
and light package. For highway use, consult applicable feder-			Module.
al, state, and local laws regarding possible additional require-
ments. There is a choice of 2 hitches, a fender & a light pack-			Control Cable Extension (K937-45) - Allows the TIG
age.			Module to be operated at distances up to 200 ft. from
K953-1 Trailer			the power source.Available in 45 ft. (13.7m).
K958-1 Ball Hitch
K958-2 Lunette Eye Hitch			Water Valve Kit (K844-1)-For use with a water-cooled
K959-1 Fender & Light Kit			TIG torch. Installs inside TIG Module.
K965-1 Cable Rack

Service Indicator Kit K1858-1 - Provides a GO / NO- GO visual indication of air cleaner element useful ser- vice life. Filter service based on restriction readings allows the longest life possible from the filter and best engine protection.

STICK OPTIONS

K704 ACCESSORY SET - Includes 35 feet (10 m) of electrode cable and 30 feet (9 m) of work cable, head- shield, work clamp and electrode holder. Cable is rated at 500 amps, 60% duty cycle.

CLASSIC® 300D & 300G