Lincoln Electric SVM194-A service manual TIG Options General Options, Trailer K953-1

Remote Control Kit K924-5

Contains remote control rheostat and 100 ft. (30.5 m) cable for adjusting the OCV at the welding site.

Return to Section TOC Return to Master TOC

Return to Section TOC Return to Master TOC

Return to Section TOC Return to Master TOC

C2.2				ACCESSORIES			C2.2
OPTIONAL FEATURES				(Field Installed)		TIG OPTIONS
GENERAL OPTIONS						TIG Module K930-2
						Provides high frequency and shielding gas control for
						AC and DC GTAW (TIG) welding applications. Its com-
			WARNING			pact case is designed for easy carrying, complete with
						a handle. High frequency bypass is built in.
P	ipe Thawing with an arc welder can cause fi				re,	Additionally, the K936-3 control cable is required if
explosion, damage to electric wiring or to the arc						remote control is used. If remote control is not used the
welder if done improperly. The use of an arc welder						K936-4 control cable is required.
for pipe thawing is not approved by the CSA, nor is						PTA-26V TIG Torch K1783-9
it recommended or supported by Lincoln Electric.						Air cooled 200 amp torch equipped with valve for gas
------------------------------------------------------------------------						flow control. 25Ft. length.
Power Plug Kit K802D						Magnum Parts Kit For PTA-26V TIG Torch KP509
A power plug kit for the auxiliary power receptacles is
available. (Provides a plug for each receptacle.)						Control Cable K936-4 (required for TIG Module)
Spark Arrestor Kit K903-1						Control cable for connecting the K930-2 TIG Module.
Includes a heavy gage steel, approved spark arrestor,						Arc Start Switch K814 (required for TIG Module)
clamp and adapter for mounting to the muffler exhaust						Comes with a 25ft.(7.6m) cable.
pipe.						Attaches to the TIG torch for convenient finger control.
TRAILER K953-1						Contactor Kit K938-1 (required for TIG Module)
Two-wheeled trailer with optional fender and light package.
For highway use, consult applicable federal, state, and local						Provide “Cold” tungsten Tip when welding with the TIG
laws regarding possible additional requirements. There is a						Module.
choice of 2 hitches, a fender & a light package.						Control Cable Extension K937-45
Ball Hitch K958-1		K958-2				Allows the TIG Module to be operated at distances up
Lunette Eye Hitch						to 200 ft. from the power source.Available in 45 ft.
Fender & Light Kit			K959-1			(13.7m).
Cable Rack K965-1						Water Valve Kit K844-1
Service Indicator Kit K1858-1						For use with a water-cooled TIG torch. Installs inside
Provides a GO / NO-GO visual indication of air clean-						TIG Module.
er element useful service life. Filter service based on
restriction readings allows the longest life possible
from the filter and best engine protection.

STICK OPTIONS

ACCESSORY SET K704

Includes 35 feet (10 m) of electrode cable and 30 feet (9 m) of work cable, headshield, work clamp and elec- trode holder. Cable is rated at 500 amps, 60% duty cycle.

Return to Section TOC Return to Master TOC

CLASSIC® 300D & 300G