•ADVANCED SETUP menu parameters
Change the initial settings (indicated in bold under each
parameter) to reflect the needs of your listening environment.
Factory presets i=q:;I:i!!!2!!;E]"
Use to reset all parameters to the factory presets.
Choices: CANCEL, RESET
Select CANCEL if you do not want the parameters of
this unit to be initialized when you reset the factory presets.
Select RESET if you want all of the parameters of this
unit to be initialized when you reset the factory presets.
•This setting does not affect the parameters in the ADVANCED SETUP menu.
•The resetting process starts next time yon turn on the power of this unit.
Remote i:;I:i!!!M0[i!!!
Use to switch the remote control ID of this unit. Choices: ID1, ID2
Select ID1 to operate this unit using an alternative
code
Select ID2 to operate this unit using the default code.
You must also make settings for the remote control (see page 36).
The ADVANCED SETUP menu is displayed in the front
panel display.
•During the AD\__N( ED SETUP procednre, audio outpnt is mnted.
•During the AD\__N( ED SETUP procednre, only MASTER O_OFF, A/B/C/DiE and the preset statio_ channel nnmber buttons (1 and 2) on the front panel are operational.
1,2,5
2,4 3
Press MASTER ON/OFF on the front panel to release it outward to the OFF position.
MAsr_R
Tuner ]i...i
(Asia and General models only)
Use to switch the frequency step selection according to the frequency spacing in your area.
Choices: AM10/FMIO0, AM9iFM50
•North, Central and South America: AM 10FM 100 (kHz)
Other areas: AMgiFM50 (kHz)
Press and hold A/B/C/DIE on the front panel and then press MASTER ON/OFF inward to the ON position.
The power of this unit is turned on, and the
ADVANCED SETUP menu appears in the fi'ont
panel display.
_°_°_ While holding down, __
presso,_
35