l_t',l_ h'N=,',I"I"iIq"
Press the preset station/channel number buttons (1 and 2) on the front panel repeatedly to move through the menu and select the parameter you want to adjust.
See page 3 5 for a complete list of available
parameters.
Press AIB/C/DIE on the front panel repeatedly to toggle between the available parameters.
Press MASTER ON/OFF to release it outward to the OFF position to confirm your setting.
MA'_TE_
The settings you made are reflected next time you turn on the
power of this unit.
You can select the unit you want to operate with the
remote control by switching the remote control ID.
1Press and hold CODE SET on the remote
control and then press TUNER on the remote control.
CODESET
While holding down CODE SET on the remote control, use the numeric buttons on the remote control to enter the
CODESET
Remote |
|
|
| |
control ID:' | Function | Code number | ||
(this unit's | ||||
|
|
| ||
setting) |
|
|
| |
| To operate | this |
| |
ID l | unit using | an | 801 | |
| alternative | code. |
| |
ID2 | To operate | this | 802 | |
| unit using | the | ||
(default setting) | det;ault code. |
| ||
*\_len you change the remote control ID, you must switch the remote control ID of this unit (see page 35).
When using multiple YAMAHA receivers or
amplifiers with the same default code setting, you
may unwantedly operate those components
simultaneously. In this case, set one of the alternative codes for this unit to operate this unit separately.
Also change the remote control ID of the Zone 2 remote control (sold separately) (see page 9).
36
