Kenwood DPX-3050, DPX-3050B, DPX-MP4050, DPX-MP4050B 1, 2, 3, 4, 5, 6 7

Switching the information displayed.
Press the [DISP] button.
Each time the button is pressed the display switches as shown
below.
In Tuner source
Information Display
Frequency
Station name "SNPS"
Charactor
Clock
Switching Display
•When operation stops for 10 seconds the name at that time is
registered, and Name Set mode closes.
•Memory numbers
- FM & AM: 30 stations
- Internal CD player: 10 discs
- External CD changer/ player: Varies according to the CD changer/
player. Refer to the CD changer/ player manual.
•The title of station/CD can be changed by the same operation
used to name it.
Attaching a title to a Station or CD.
1Receive/play the station/disc you want to attach a title to
•A title can't be attached to MD or MP3 media.
•Disc Naming can't be done during clock display.
2Enter name set mode
Press the [NAME] button for at least 2 seconds.
"Name Set" is displayed.
3Move the cursor to the enter character position
Press the [4] or [¢] button.
4Select the character type
Press the [38] button.
Each time the button is pressed the character type switches as
shown below.
Character type
Alphabet upper case
Alphabet lower case
5Select the characters
Press the [FM] or [AM] button.
Characters can be entered by using a remote with a number
buttons.
Example: If "DANCE" is entered.
Character Button #Times pressed
"D" [3] 1
"A" [2] 1
"N" [6] 2
"C" [2] 3
"E" [3] 2
6Repeat steps 3 through 5 and enter the name.
7Exit name set mode
Press the [NAME] button.
Station/Disc Naming (SNPS/DNPS)
General features
— 12—
English
DPX-MP4050(M-TKR)(E) 2003.02.14 09:03 AM Page 12