— 31—— 31—
Installation

Installation

When performing a check of the CD operation prior to installation,
place this unit in a horizontal position and perform a loading/eject
of the CD.
2CAUTION
Install onto the car bracket using the supplied screws (M5 ×6
mm, M5 ×7 mm). The holes of the car bracket to use will differ
depending on the car model.
When a ground wire is
included in the wiring kit
(which is sold separately),
fasten the ground wire
with the binding screw
located on the rear panel
of this unit. Accessory1
(M5 ×6 mm)
or Accessory4
(M5 ×7 mm)
Accessory3
(Only for NISSAN car)
Screw (M4X8)
(commercially
available)
DPX-MP4050(M-TKR)(E) 2003.02.14 09:03 AM Page 31