English
— 36—
Error 99: Something is wrong with the disc magazine. Or the
unit is malfunctioning for some reason.E99
➪Check the disc magazine. And then press the reset
button on the unit. If the "Error 99" code does not
disappear, consult your nearest service center.
Hold: The protective circuit in the unit activates when the
temperature inside the automatic disc changer
exceeds 60°C (140°F), stopping all operation.E0d
➪Cool down the unit by opening the windows or
turning on the air conditioner. As the temperature
falls below 60°C (140°F), the disc will start playing
again.
No Name: • Attempted to display DNPS during the CD play
having no disc names preset.E51
•Attempted to display SNPS during the receiving
session of the station having no station name
preset.E50
No Title: Attempted to display the disc title or track title while
the MD having no MD title is being played.E53
No Text: • Attempted to display the disc text or track text
while the CD having no CD text is being played.E54
•Attempted to display the ID3 tag while the MP3
having no ID3 tag is being played.E52
Load: Discs are being exchanged in the Disc changer.E57-1
F-Check: The unit is reading the data on the disc.E57-2
(Blink): The CD player section is not operating properly.E59
➪Reinsert the CD. If the CD cannot be ejected or the
display continues to flash even when the CD has
been properly reinserted, please switch off the
power and consult your nearest service center.
(Blink): The tape player section is not operating properly.E60
➪Reinsert the Tape. If the tape cannot be ejected or
the display continues to flash even when the tape
has been properly reinserted, please switch off the
power and consult your nearest service center.
N/A File: A MP3 is played with a format that this unit can't
support.E63
Trou bleshooting Guide
DPX-MP4050(M-TKR)(E) 2003.02.14 09:03 AM Page 36