English | 23
Listen to the tuner
Listening to the radio
Selecting a tuner source
Press the [SRC] button to select a “TUNER”.
Selecting a band
Press the [1] button.
Pressing the button switches the receiving band (FM1,
FM2, FM3, MW, SW1, SW2).
Selecting a station
Press the [E] or [F] button.
The tuning mode can be changed. Refer to
<Tuner setting> (page 23).
Station preset memory
You can store a station in the memory.
1 Press the [E] or [F] button to select the
channel.
2 Press and hold the button ([1] to [6]) to which
you want to assign the selected station.
“STORED” appears and the station is registered.
About the Mix station preset mode
•In this mode, different bands and tuner sources can be
saved in the same preset layer, which allows you to recall
the desired station without switching between bands or
tuner sources.
Auto memory
You can register 6 (FM)/ 6 (AM) stations with good
reception automatically.
1 Select the Tuner source.
Refer to <Source selection> (page 10).
2 Press and hold the [AUDIO] button.
Enter the Function setting mode.
3 Use the [Control knob] to select “SETTINGS” >
“AUTO MEMORY”.
For how to use the [Control knob], refer to <How to
select the item> (page 9).
4 Use the [Control knob] to select “YES”.
When 6 (FM)/ 6 (AM) stations that can be received
are stored in the memory, the process in this mode
is completed.
Preset tuning
Recalling a station from the memory.
1 Press the [1] button to select a band.
2 Press the button ([1] to [6]) corresponding to
the station you want to listen to.
Tuner setting
You can set up the tuner.
1 Select the Tuner source.
Refer to <Source selection> (page 10).
2 Press and hold the [AUDIO] button.
Enter the Function setting mode.
3 Use the [Control knob] to select “SETTINGS”.
For how to use the [Control knob], refer to <How to
select the item> (page 9).
4 Use the [Control knob] to select a Tuner
setting item
Display Description
“LOCAL SEEK” Only stations whose reception is good are searched in
auto seek tuning. (FM only)
“ON” / “OFF”
“SEEK MODE” Sets the tuning mode.
“AUTO1”: Automatic search for a station.
“AUTO2”: Search in order of the stations in the preset
memory.
“MANUAL”: Normal manual tuning.
“MONO SET” You can reduce the noise when stereo broadcasts are
received as monaural. (FM only)
“ON” / “OFF”
( : Factory setting)
5 Use the [Control knob] to select a setting.
The previous item appears.
Exit the Function setting mode.
Press and hold the [6] button.
13-2DIN_M_EN_00.indb 23 12/11/26 15:59