English | 31
When no device can be selected
•If a cell-phone is already selected, deselect it, and then
select a different one.
•If you cannot selec t a device using the audio player,
connect the device with the audio player.
Deleting a registered Bluetooth
device
You can delete a registered Bluetooth device.
1 Press the [Ú] button.
“BT MODE” appears and enter the Bluetooth mode.
2 Use the [Control knob] to select “SETTINGS” >
“PAIRING” > “DEVICE DELETE”.
For how to use the [Control knob], refer to <How to
select the item> (page 9).
“(name)” appears.
3 Use the [Control knob] to select an Bluetooth
device.
4 Use the [Control knob] to select “YES”.
“COMPLETED” appears.
Exit the Bluetooth mode.
Press the [Ú] button.
When a registered device is deleted
•When a registered cell-phone is deleted, its phone Book,
and log are also deleted.
Bluetooth device registration test
You can check whether a Bluetooth device can be
registered by operating this unit.
1 Press the [Ú] button.
“BT MODE” appears and enter the Bluetooth mode.
2 Use the [Control knob] to select “BT TEST
MODE”.
For how to use the [Control knob], refer to <How to
select the item> (page 9).
“PLEASE PAIR YOUR PHONE” appears.
3 By operating the Bluetooth device, register
the hands-free unit or audio unit (pairing).
Select “DPX-U51**BT” (for DPX-U5130BT) from the
list of found units.
4 If “(Bluetooth device name)” appears, proceed
to step 6.
5 Input the PIN code (“0000”) in the Bluetooth
device.
6 Use the [Control knob] to select an Bluetooth
device.
When pairing is completed successfully, a
connection test starts automatically.
When the connection test is completed, test results
are displayed on a function basis (“OK”: Enabled;
“NG”: Disabled).
Display Description
“PAIRING” Registration in this unit
“HF CNT” Hands-free phoning
“AUD CNT” Audio playback
“PB DL” Phone Book downloading
7 Press the [Control knob].
Exit the test mode.
13-2DIN_M_EN_00.indb 31 12/11/26 15:59