4 | DPX-U5130BT/ DPX-U5130
Before use

Safety precaution

# WARNING

To prevent injuries or a re, take the following
precautions:
•Stop the car before operating the unit.
•To prevent a short circuit, never put or leave any
metallic objects (such as coins or metal tools) inside
the unit.

! CAUTION

•Adjust the volume so that you can hear the sound
outside the car. Driving with the volume too high
may cause an accident.
•Wipe off the dir t on the panel with a dry silicon or
soft cloth.
Failure to observe this precaution may result in
damage to the monitor or unit.
•I f you experience problems during installation,
consult your Kenwood dealer.

Condensation

When the car is air-conditioned, moisture may collect
on the laser lens. This may cause disc read errors. In
this case, remove the disc and wait for the moisture
to evaporate.

How to reset your unit

If the unit fails to operate properly, press the Reset
button. The unit returns to the factory settings when
the Reset button is pressed.
Reset button

Important information

Notes

•I f you experience problems during installation,
consult your Kenwood dealer.
•When you purchase optional accessories, check with
your Kenwood dealer to make sure that they can
work with your model and in your area.
•Charac ters that conform to ISO 8859-1 can be
displayed.
•The illustrations of the display and panel appearing
in this manual are examples used to explain more
clearly how the controls are used. Therefore, what
appears on the display in the illustrations may differ
from what appears on the display on the actual
equipment, and some of the images on the display
may be inapplicable.

Regulatory Compliance

The marking of products using lasers

The label is attached to the chassis/case and says
that the component uses laser beams that have been
classified as Class 1. It means that the unit is utilizing
laser beams that are of a weaker class. There is no
danger of hazardous radiation outside the unit.
13-2DIN_M_EN_00.indb 4 12/11/26 15:59